Bronze



Bronze

Bronze ist eine Legierung mit guten Schmelzeigenschaften und deswegen ist sie für Additive Manufacturing besonders geeignet. Aus Bronze können endgültige Elemente, Vorserien für Goldschmiedekunst oder bearbeitbare Statueßn gebaut werden.
Der Werkstoff kann einfach poliert werden und ist härter als die Silberlegierung.

Technical Data    
Typical part accuracy (Quote<150mm) - - - - - - - ± 0.1 – 0.2 mm
Typical part accuracy (Quote>=150mm) - - - - - - - ± 0.05 every 25mm
Surface roughness as built - - - - - - - Ra 6 - 7 μm
Surface Roughness (after machining) - - - - - - - Ra < 1.6µm
Physical and Chemical properties    
Chemical composition   Cu 90%
Sn 10%
Physical properties Relative density Approx. 99,85 %
  Density 8,80 g/cm3
Mechanical properties Test Method As Built  
Tensile strength DIN EN 10002 Approx. 400 ± 20 MPa  
Yield strength (Rp 0.2 %) DIN EN 10002 Approx. 450 ± 20 MPa  
Elongation at break DIN EN 10002 Approx 5 ± 2 %  
Young's Modulus - Approx. 120 · 10 N/mm2  
Hardness HV 0.2 DIN EN 10002 171 ± 7  

The information presented are typical values intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes.
End-use material performance can be impacted (+/-) by, but not limited to, part design, end-use conditions, etc. Actual values will vary with build conditions.
Product specifications are subject to change without notice.
The performance characteristics of these materials may vary according to application, operating conditions, or end use. Each user is responsible for determining that the material is safe, lawful and technical suitable for the intended laws and regulations. Zare makes no warranties of any kind, express or implied, including, but not limited to, the warranties of merchantability, fitness for a particular use, or warranty against patent infringement. All Trademarks included in this document are property of the respective owner.