PPSF (Polyphenylsulfon)



PPSF (Polyphenylsulfon)

PPSF/PPSU ist das Material mit der höchsten chemischen und Wärmebeständigkeit. Es ist ideal für Anwendungen in der Raumfahrt, Automobilindustrie und Zahntechnik. Die aus PPSF hergestellten Komponenten besitzen nicht nur hervorragende mechanische Eigenschaften, sondern sie verfügen auch über eine optimale Maßgenauigkeit, um die Merkmale des Endproduktes genau zu reproduzieren.
PPSF kann in Autoklaven mit Dampf, Ethylenoxid , Plasma, chemischer Sterilisation und Strahlung sterilisiert werden.

Mechanical Properties1 Test Method English Metric
Tensile Strength (Type 1, 0.125”, 0.2”/min) ASTM D638 8,000 psi 55 MPa
Tensile Modulus (Type 1, 0.125”, 0.2”/min) ASTM D638 300,000 psi 2,068 MPa
Tensile Elongation (Type 1, 0.125”, 0.2”/min) ASTM D638 3% 3%
Flexural Strength (Method 1, 0.05”/min) ASTM D790 15,900 psi 110 MPa
Flexural Modulus (Method 1, 0.05”/min) ASTM D790 320,000 psi 2,206 MPa
IZOD Impact, notched (Method A, 23°C) ASTM D256 1.1 ft-lb/in 58.73 J/m
IZOD Impact, un-notched (Method A, 23°C) ASTM D256 3.1 ft-lb/in 165.5 J/m
Thermal Properties3 Test Method English Metric
Heat Deflection (HDT) @ 264 psi ASTM D648 372°F 189°C
Coefficient of Thermal Expansion ASTM D696 3.1 E-05 in/in/°F 5.5 E-05 mm/mm/°C
Glass Transition Temp. (Tg) DMA (SSYS) 446°F 230°C
Melt Point - - - - - - - - - Not Applicable2 Not Applicable2
Other3 Test Method Value Available Colors
Specific Gravity ASTM D792 1.28
Tan
Flame Classification UL94 VØ (0.126”, 3.2 mm)
Rockwell Hardness ASTM D785 M86
Dielectric Strength IEC 60112 14.6 kV/mm
Dielectric Constant @ 60 Hz IEC 60250 3.45
Environmental Resistance4 24 hours @23°C (73°F) 24 hours @100°C (212°F)  
Antifreeze (Prestone), 50% Passed Passed  
Gasoline-Unleaded Passed Not tested  
Motor Oil 10W-40 Passed Passed  
Power Steering Fluid Passed Passed  
Transmission Fluid Passed Passed  
Windshield Washer Fluid, 50% Passed Not tested  

1 Build orientation is on side long edge
2 Due to amorphous nature, material does not display a melting point
3 Literature value unless otherwise noted
4 Test results based on Stress Crack Resistance (24-hour immersion @ 23°C and @ 100°C)

The information presented are typical values intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes.
End-use material performance can be impacted (+/-) by, but not limited to, part design, end-use conditions, etc. Actual values will vary with build conditions.
Product specifications are subject to change without notice.
The performance characteristics of these materials may vary according to application, operating conditions, or end use. Each user is responsible for determining that the material is safe, lawful and technical suitable for the intended laws and regulations. Zare makes no warranties of any kind, express or implied, including, but not limited to, the warranties of merchantability, fitness for a particular use, or warranty against patent infringement.
All information contained in this document were supplied by Stratasys Inc. Copyright© 2013
All Trademarks included in this document are property of the respective owner