Somos®WaterClear Ultra



Somos® NanoTool

Somos®WaterClear Ultra: ist ein optisch klares Kunstharz mit ABS-ähnlichen Eigenschaften und einer guten Temperaturbeständigkeit. Für die Herstellung von farblosen, funktionalen und präzisen Bauteilen mit Acryl-Optik.
WaterClear ist ideal für Anwendungen, bei denen Durchsichtigkeit verlangt wird, wie Linsen in der Automobilindustrie, Flaschen, Elemente für die Durchflussmessungsanalysen, Packaging Prototypen, leichte Rohre und ähnliches.

Mechanical Properties Test Method English Metric
Tensile Strength ASTM D638 7.9-8.1 kpsi 55-56 MPa
Tensile Modulus ASTM D638 414-421 kpsi 2,860-2,900 MPa
Elongation at Break ASTM D638 6-8 % 6-8 %
Elongation at Yield ASTM D638 4 % 4 %
Poisson’s Ratio ASTM D638 0.40-0.42 0.40-0.42
Flexural Strength ASTM D790 11.8-12.4 psi 82-85 MPa
Flexural Modulus ASTM D790 349-373 kpsi 2,410-2,570 MPa
IZOD Impact, notched A ASTM D256 0.44-0.48 ft lb/in 0.24-0.26 J/cm
Thermal Properties Test Method English Metric
HDT @ 66 psi ASTM D648-98 115-116°F 46-47°C
HDT @ 264 psi ASTM D648-98 108-110°F 42-43°C
HDT @ 66 psi Thermal Postcure ASTM D648-98 139-142°F 59-61°C
HDT @ 264 psi Thermal Postcure ASTM D648-98 120-122°F 49-50°C
Coefficient Thermal Expansion -40-0 °C/-40-32°F ASTM E831 35.3-37.1 μin/in°F 63.6-66.8 μm/m°C
Coefficient Thermal Expansion 0-50 °C/32-122°F ASTM E831 48.8-51.7 μin/in°F 87.8-93.0 μm/m°C
Coefficient Thermal Expansion 50-100 °C/122-212°F ASTM E831 91.3-95.5 μin/in°F 164.3-171.9 μm/m°C
Coefficient Thermal Expansion 100-150 °C/212-302°F ASTM E831 83.3-92.9 μin/in°F 149.9-167.1 μm/m°C
Tg E1545 108-115°F 42-46°C
Other Test Method Value Available Colors
Shore Hardness (D) D2240 86-87
Transparent
Water absorption, % D570-98 1.1 %
Index of Refraction D542 1.515
Dielectric Strength D149-97a 14.5-15.5 kV/mm
Dielectric Constant @ 60 Hz D150-98 3.0-3.2
Dielectric Constant @ 1 Khz D570-98 3.3-3.6
Dielectric Constant @ 1 Mhz D150-98 3.0-3.2
Density @ 25°C - - - - - 1.13 g/cm3

The information presented are typical values intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes.
End-use material performance can be impacted (+/-) by, but not limited to, part design, end-use conditions, etc. Actual values will vary with build conditions.
Product specifications are subject to change without notice.
The performance characteristics of these materials may vary according to application, operating conditions, or end use. Each user is responsible for determining that the material is safe, lawful and technical suitable for the intended laws and regulations. Zare makes no warranties of any kind, express or implied, including, but not limited to, the warranties of merchantability, fitness for a particular use, or warranty against patent infringement.
All information contained in this document were supplied by DSM Desotech Inc. Copyright© 2013
All Trademarks included in this document are property of the respective owner